Use these mixing pots to measure and mix West System or other epoxy. Pots can be reused - simply pop out any leftover, cured epoxy. 

These pots come in 16 oz. and 32 oz. sizes to accommodate batch sizes that are convenient for most epoxy projects. Calibration markings appear every 2 ounces, from 2 oz. to 14 oz. on the 16 oz. cup, and 2 oz. to 28 oz. on the 32 oz. cup.

Note: Do not attempt to adjust the epoxy cure time by altering the mix ratio. An accurate ratio is essential for a proper cure and full development of physical properties.

[TABS]

Directions

Dispensing with Mini Pumps: 

• Use to dispense the resin and hardener.
• Pump one full pump stroke of resin for each one full pump stroke of hardener.
• Depress each pump head fully and allow the head to come completely back to the top before beginning the next stroke.

Partial strokes will give the wrong ratio. Before you use the first mixture on a project, verify the proper ratio according to the instructions that come with the pumps. Re-check the ratio anytime you experience problems with curing.

Dispensing without Mini Pumps (weight/volume measure):

• To measure 105 Resin and or by weight or volume, combine five parts resin with one part hardener.
• To measure 105 Resin and or by volume, combine three parts epoxy resin with one part hardener (by weight, 3.5 parts resin-1 part hardener).

Video

[/TABS]